ROWAFLEX® X 100
Stabilizer for aqueous pastes
Stabilizer for aqueous pastes
Type
Paste Stabilizer
Chemical character
Blend of polyethyleneoxide/ polyacrylamide
Density
99 kg/m³
pH value
8.5
Ionogenity
anionic
Appearance
opaque, ropy liquid
Product viscosity
2500 - 3500 mPa.s (Brookfield RVT, Sp. 2/20 rpm)
Properties
ROWAFLEX® X 100
- stabilizes and thickens aqueous pastes of heatsealable resins
- due to the rheological behaviour it provides a clean surface of the printing screen
- prevents penetration of the printed dot into the substrate
- allows complete utilization of the print paste
Application
ROWAFLEX® X 100 is a suitable Stabilizer component for all aqueous hotmelt pastes.
For the preparation of the print paste, ROWAFLEX® X 100 should be added as last
component. The stirring into the paste should be done carefully and high shearing forces need to be avoided. The application quantity depends on the mesh/CP number of the printing cylinder and varies between 8.0 and 12.0 kg on 100 kg ready made paste.
Recipe recommendation
Copolyamide paste
Water / H20 | 55 kg |
ROWAFLEX® DF 2 | 0.2 kg |
ROWAFLEX® X 572 | 1 kg |
ROWALIT® 200-1, 0-80 | 30 kg |
ROWAFLEX® TH 3 | 0.4 kg |
ROWAFLEX® X 100 | 10 kg |
Copolyamide paste with plasticizer
Water / H20 | 55 kg |
ROWAFLEX® DF 2 | 0.2 kg |
ROWAFLEX® X 502 | 3 kg |
ROWALIT® 200-2, 0-80 | 30 kg |
ROWAFLEX® TH 3 | 0.4 kg |
ROWAFLEX® X 100 | 10 kg |
Crosslinkable paste system
Water / H2O | 55 kg |
ROWAFLEX® DF 2 | 0.2 kg |
ROWAFLEX® X 600 | 3 kg |
ROWALIT® 200-63, 0-80 | 30 kg |
ROWAFLEX® TH 3 | 0.4 kg |
ROWAFLEX® X 100 | 10 kg |
Polyethylene Paste
Water / H2O | 55 kg |
ROWAFLEX® DF 2 | 0.2 kg |
ROWAFLEX® X 502 | 3 kg |
ROWALIT® N 100-20, 0-80 | 30 kg |
ROWAFLEX® TH 3 | 0.4 kg |
ROWAFLEX® X 100 | 10 kg |
Polyurethane paste
Water / H2O | 55 kg |
ROWAFLEX® DF 2 | 0.2 kg |
ROWAFLEX® X 502 | 3 kg |
ROWALIT® 500-37, 0-80 | 30 kg |
ROWAFLEX® TH 3 | 0.4 kg |
ROWAFLEX® X 100 | 10 kg |
Caution: ROWAFLEX® X 100 is very slippery if spilled!