Indutech

Indutech comprise solutions and products for engineering, chemical- and electronics industry. These are primarily acoustic insulations, polishing technologies, isolations, gaskets or fuel cells.

In cable isolations, super-absorbent-polymers (SAP) are used in combination with thermoplastic powders. Furthermore, selective washing-off from coating media, imprint/stamp on substrates to the required residual content of finishings and its followed stress and fixation to the defined thread count belong to this field of applications. Dyeing and finishing of filtration- and screenprint fabrics are requiring the usage of thermoplastic powders.

	ROWALIT^® 300-1/18/150	ROWALIT^® 300-1/28/150	ROWALIT^® 300-1/28-25	ROWALIT^® 300-1/40/55	ROWALIT^® 500-1	ROWALIT^® 500-9	ROWALIT^® SS 8
Type	EVA	EVA	EVA	EVA	TPU	TPU	Ionomer
Melting range / °C DSC	75 - 79	65 - 69	65 - 69	55 - 59	90 - 105	130 - 145	95 - 100
Melting viscosity / g
MFI 160°C, 2.16 kg, 10 min.					4	40
MFI 190°C, 2.16 kg, 10 min.	150	150	25	55			6
Chemical Basis	Ethylene-Vinyl-Acetate	Ethylene-Vinyl-Acetate	Ethylene-Vinyl-Acetate	Ethylene-Vinyl-Acetate	Polyether PU	Aromatic Polyester PU	Ionomer / Copolymer
Density	0.937	0.95	0.95	0.96	1.2	1.19	0.94
VA-Content (%)	18%	28%	28%	40%
Powder sizes
Pastedot
Doubledot
Powderdot
Scatter
Granules
Resistance to dry cleaning						very good
Washing resistance in °C	40°C	40°C	40°C	40°C		95°C
Steam resistance						very good
Heat resistance in °C	40	40	40	40	90	110	80
Fusing conditions with flow-through-press
Lamination temperature in °C	90 - 95	80 - 85	80 - 85	70 - 75	100 - 120	135 - 150	-
Pneumatic pressure N / cm²	2 - 4	2 - 4	2 - 4	2 - 4	3 - 5	3 - 5	-
Time in sec.	3 - 5	3 - 5	3 - 5	3 - 5	10 - 15	12 - 20	-
Appearance	White powder	White powder	White powder	White powder	White powder	White powder	White powder

	ROWALIT^® 300-1/18/150	ROWALIT^® 300-1/28/150	ROWALIT^® 300-1/28-25	ROWALIT^® 300-1/40/55	ROWALIT^® 500-1	ROWALIT^® 500-9	ROWALIT^® SS 8
Type	EVA	EVA	EVA	EVA	TPU	TPU	Ionomer
Melting range / °C DSC	75 - 79	65 - 69	65 - 69	55 - 59	90 - 105	130 - 145	95 - 100
Melting viscosity / g
MFI 160°C, 2.16 kg, 10 min.					4	40
MFI 190°C, 2.16 kg, 10 min.	150	150	25	55			6
Chemical Basis	Ethylene-Vinyl-Acetate	Ethylene-Vinyl-Acetate	Ethylene-Vinyl-Acetate	Ethylene-Vinyl-Acetate	Polyether PU	Aromatic Polyester PU	Ionomer / Copolymer
Density	0.937	0.95	0.95	0.96	1.2	1.19	0.94
VA-Content (%)	18%	28%	28%	40%
Powder sizes
Pastedot
Doubledot
Powderdot
Scatter
Granules
Resistance to dry cleaning						very good
Washing resistance in °C	40°C	40°C	40°C	40°C		95°C
Steam resistance						very good
Heat resistance in °C	40	40	40	40	90	110	80
Fusing conditions with flow-through-press
Lamination temperature in °C	90 - 95	80 - 85	80 - 85	70 - 75	100 - 120	135 - 150	-
Pneumatic pressure N / cm²	2 - 4	2 - 4	2 - 4	2 - 4	3 - 5	3 - 5	-
Time in sec.	3 - 5	3 - 5	3 - 5	3 - 5	10 - 15	12 - 20	-
Appearance	White powder	White powder	White powder	White powder	White powder	White powder	White powder

	ROWALIT^® H 8	ROWALIT^® H 20	ROWALIT^® H 40	ROWALIT^® H 70	ROWALIT^® H 150
Type	LDPE	LDPE	LDPE	LDPE	LDPE
Melting range / °C DSC	107 - 110	104 - 108	102 - 106	100 - 104	98 - 102
Melting viscosity / g
MFI 190°C, 2.16 kg, 10 min.	8	20	40	70	150
Chemical Basis	Low-Density-Polyethylene	Low-Density-Polyethylene	Low-Density-Polyethylene	Low-Density-Polyethylene	Low-Density-Polyethylene
Density	0.92	0.918	0.917	0.918	0.916
Powder sizes
Pastedot
Doubledot
Powderdot
Scatter
Granules
Washing resistance in °C	60°C	60°C	60°C	60°C	40°C
Steam resistance	good	good	good	good	fair
Heat resistance in °C	80	80	80	80	60
Fusing conditions with flow-through-press
Lamination temperature in °C	130 - 150	130 - 150	130 - 150	130 - 140	120 - 130
Pneumatic pressure N / cm²	3 - 5	3 - 5	3 - 5	3 - 5	2 - 5
Time in sec.	10 - 15	10 - 15	10 - 15	10 - 15	8 - 10
Appearance	White powder	White powder	White powder	White powder	White

	ROWALIT^® H 8	ROWALIT^® H 20	ROWALIT^® H 40	ROWALIT^® H 70	ROWALIT^® H 150
Type	LDPE	LDPE	LDPE	LDPE	LDPE
Melting range / °C DSC	107 - 110	104 - 108	102 - 106	100 - 104	98 - 102
Melting viscosity / g
MFI 190°C, 2.16 kg, 10 min.	8	20	40	70	150
Chemical Basis	Low-Density-Polyethylene	Low-Density-Polyethylene	Low-Density-Polyethylene	Low-Density-Polyethylene	Low-Density-Polyethylene
Density	0.92	0.918	0.917	0.918	0.916
Powder sizes
Pastedot
Doubledot
Powderdot
Scatter
Granules
Washing resistance in °C	60°C	60°C	60°C	60°C	40°C
Steam resistance	good	good	good	good	fair
Heat resistance in °C	80	80	80	80	60
Fusing conditions with flow-through-press
Lamination temperature in °C	130 - 150	130 - 150	130 - 150	130 - 140	120 - 130
Pneumatic pressure N / cm²	3 - 5	3 - 5	3 - 5	3 - 5	2 - 5
Time in sec.	10 - 15	10 - 15	10 - 15	10 - 15	8 - 10
Appearance	White powder	White powder	White powder	White powder	White

Products
- Polymers
- Markets
  - Buildtech
  - Clothtech
  - Geotech
  - Hometech
  - Indutech
  - Medtech
  - Mobiltech
  - Protech
  - Sporttech
- Paste Additives
- Customer focused developments
- Product Search