| Type | Copolyamide |
| Melting range / °C DSC | 110 - 120 |
| Melting viscosity / g | |
| MFI 160°C, 2.16 kg, 10 min. | 210 |
| Chemical Basis | Copolyamide |
| Powder sizes | |
| Pastedot |  |
| Doubledot | |
| Powderdot |  |
| Scatter | |
| Granules | |
| Resistance to dry cleaning | very good |
| Washing resistance in °C |
60°C |
| Steam resistance | good |
| Heat resistance in °C |
150 |
| Fusing conditions with flow-through-press | |
| Lamination temperature in °C | 120 - 140 |
| Pneumatic pressure N / cm² | 3 - 5 |
| Time in sec. | 10 - 15 |
| Appearance | white powder |
Properties
Copolyamide - suitable in use with ROWAFLEX X 600 Crosslinker in waterbased pastes.
After the bonding and thermosetting process is been done a heat stability of 150°C is achieved. Further to this an excellent wash resistance (95°C), steam resistance and a resistance against a variety of solvents is gained. Thus, a broad range of different applications is possible.
Application
Interlinings with fusing conditions and low viscosity at good fastness profile; siliconized fabrics; in paste dot coating as crosslinkable thermoplast as base dot in doubledot process or single dot in direct lamination - outstanding fastnesses are reachedVersion: 24.06.2021
